<img height="1" width="1" style="display:none;" alt="" src="https://px.ads.linkedin.com/collect/?pid=6897348&amp;fmt=gif">

TarraBot Autonomous Golf Ball Picker

No buried wires. No base station. TarraBot picks, unloads, and charges itself, so your team can spend their time where it matters most.

What It Does

TarraBot follows a mapped route across your range and picks balls, carrying about 1,600 per load. When the basket is full, it drives to the unload point, unloads, and goes back to work. When the battery runs low, it returns to its charger on its own.

360° obstacle detection picks up people and objects in its path. TarraBot stops and goes around them.

It can pick around the clock, on whatever schedule fits your range.

Compact Unload Area

TarraBot drives forward and in reverse, and it normally backs out of the unload point after emptying its baskets. It can also make a three-point turn to get in and out of tight spots, so the drop-off doesn’t need a long drive-through bridge or extra room to turn around.

Setup Without Trenching

No buried wires or beacons

The range is mapped with high-precision RTK GNSS

No base station on site

Positioning corrections come in over cellular

2-gang picker included

TarraBot arrives ready to work.

Built for Real Range Conditions

TarraBot was developed and tested on Irish ranges with steep banks and wet turf. ATV-style tires and a stainless steel, powder-coated chassis help it hold traction on soft ground and stand up to golf ball strikes.

Tarracor TarraBot Autonomous Golf Ball Picker

TarraBot Specs

TarraBot autonomous robot golf ball picker technical specifications

Capacity per load

~ 1,600 balls

 Run time

~ 6-8 hours continuous

 Charge time

~ 4 hours (starting at 20%)

 Speed

~ 3.7 mph

 Operating hours

Can pick 24/7, based on your schedule

 Battery

Lithium, 51.2 V, 105 Ah (~5 kWh)

 Drive

Electric, zero-turn

 Motors

Brushless DC

 Tires

22 in × 11 in, ATV style

 Chassis

Stainless steel, powder coat

 Picker

2-gang

 Positioning

RTK GNSS

 Position corrections

Cellular (no base station on site)

 Connectivity

5G/4G LTE and WiFi

 Obstacle detection

360º Lidar

 Auto unload

Yes

 Auto charge

Yes

 Monitoring

Real-time status and notifications in the TarraBot Pro app

Planning Comes First

Every range is different. Layout, terrain, and ball volume all affect how a robotic picker fits your operation. That’s the first conversation worth having.

OnPar Automation brings hands-on installation and support experience to every range we work with, so you’re working with a team that knows how driving ranges actually operate.

TarraBot FAQ

Have questions about autonomous golf ball pickers? Here are a few quick answers, but the best way to learn how TarraBot would work at your range is to talk with our team. We’re always happy to talk it through.

  • How does TarraBot navigate the range?

    TarraBot uses RTK GNSS positioning to follow a mapped route across the range. Position corrections come in over a cellular connection, so there’s no base station to install on site.

  • Do I need to install wires or beacons?
    No. There are no buried wires or perimeter beacons. The range is mapped during setup, and TarraBot works from that map.
  • Does a driving range need to close to install a robotic golf ball picker?
    It depends on the system. Robotic pickers that rely on buried perimeter wire require trenching, which can disrupt range operations. TarraBot uses GNSS positioning with cellular corrections instead, so there’s no wire or base station to install, and your range can stay open during setup. OnPar Automation works with private clubs, municipal ranges, and stand-alone facilities, and we plan every project around the facility’s guests, schedule, and standards.
  • How many balls does TarraBot collect?

    TarraBot carries about 1,600 balls per load. Daily collection depends on how the schedule and picking areas are set up for your range, and OnPar can help you estimate it for your facility.

  • How long does it run on a charge?
    About 6 to 8 hours of continuous picking. Charging from 20% takes about 4 hours, and TarraBot returns to its charger on its own when the battery runs low.
  • Can TarraBot pick around the clock?

    Yes. TarraBot can pick day and night on whatever schedule fits your range.

  • Can TarraBot pick while golfers are hitting?
    Yes. TarraBot is built to work on an active range. Its stainless steel, powder-coated chassis is designed to take hits from golf balls day after day and still hold up, so picking doesn’t have to wait until the range closes.
  • What happens if a person or object is in its path?
    TarraBot has 360° obstacle detection. It stops when it detects a person or object and then goes around it.
  • What robotic golf ball picker works well on wet grass?

    TarraBot was developed and tested on Irish driving ranges, where wet turf and standing water are part of daily operation. ATV-style tires and a stainless steel chassis help it hold traction and keep picking on soft, wet ground. Talk with OnPar Automation about how TarraBot would work on your range

  • Which golf ball picking robots work on hilly driving ranges?

    TarraBot, an autonomous golf ball picker developed on Irish ranges with steep banks and uneven terrain, is built for slopes and soft ground. Its electric zero-turn drive, ATV-style tires, and stainless steel chassis keep it steady on hills. Talk with OnPar Automation about how TarraBot would work on your range

  • What’s the best robotic golf ball picker for a small driving range?
    TarraBot is well suited to small driving ranges because it needs no buried wires, beacons, or on-site base station, which keeps setup simple. It drives forward and in reverse, so the unload area can stay compact without a long drive-through or room to turn around. TarraBot works on larger ranges too, and OnPar Automation helps plan the setup around each facility’s layout and ball volume.
  • Does TarraBot unload on its own?
    Yes. When the picker is full, TarraBot drives to the unload point, empties the baskets, and returns to picking. It drives forward and in reverse, so it can pull in, unload, and back out without needing a long drive-through or room to turn around.
  • Can TarraBot work with an existing ball management system?
    Yes. TarraBot works with existing ball management systems, including Range Servant ditch systems that move collected balls to the ball washer. OnPar Automation reviews each range’s layout to confirm the right unload setup.
  • What picker does TarraBot use?
    TarraBot works with a 2-gang picker, which comes with the system.
  • How do I monitor TarraBot?
    The TarraBot Pro app shows battery level, operating status, and other activity in real time, and it sends notifications so you know when something needs attention.
  • Does TarraBot need maintenance?

    Yes. Autonomous doesn’t mean maintenance-free. TarraBot needs only routine cleaning, inspection, and preventive maintenance to keep its sensors, wheels, picking components, and charging system working reliably.

Find the Right Fit for Your Range

Every facility runs differently. We’ll help you plan around yours.